Este site está protegido pela Política de privacidade da hCaptcha e da hCaptcha e aplicam-se os Termos de serviço das mesmas.
As this is a bespoke service, it can take 3 - 5 working days to prepare the cuts. If there are many cuts or we think it may take longer than usual, we will try to notify customers of any delays and the expected shipping date. Please note that because this is a bespoke service, orders are non-cancellable and non-returnable.
Add to basket in metres only what you need and we will cut it and solder the strip attaching a 15cm long wire/cable to be connected to a LED driver (LED Driver sold separately.
For a customised strip quotation, kindly email your requirements to sales@uno-lighting.com
Sold per metre - Continuous Run Built in COB 3000K Warm White & 4000K Cool White strip/. supplied per metre, almost no voltage drop for Up to 5- 7 Metres runs (10 Metres if powered from both ends), only needs one end power. Linear Light, no dark spot, no short circuit risk. Flicker Free for all 24V constant driver, support PMW.
Run 5 -7 Metres- Powered from One End
Run 10 Metres - Must Powered from Both End from One Driver (Looped)
Neon COB illuminate from Top Bend, Low Profile Diffuse/ Opal Waterproof Sleeve Strip. IP67 Suitable for Outdoor Waterproof, Linear Light, no dark spot with extra Milky Cover Effect, No short circuit risk. Flicker Free for all 24V constant driver, support PMW.
Enhance your lighting experience with our Extra Milky Cover Effect, which adds a soft and diffused touch to your Neon COB strip. It ensures that your space is illuminated evenly and beautifully, eliminating harsh glares.
14W per Meter, IP67, 528 LEDs per meter, 10 Meters Reel, 24V Super Bright LED Strip, 1540lm/M, CRI 90, Dimension: W12mm x H4mm x L10000mm. Seamless Light, Dot free array- continuous light output from LED chips, invisible LED chips
Long lasting premium LED strip in commercial grade suitable for professional installations. Available in Warm White 3000K, Cool White 4000K.
Dimmable through remote control, Dimmable Drivers or through our smart controller a smart speaker/ device (Sold Separately).
All Strips cannot be plug direct to the Mains, it will require an 24V Drivers to power.
This product listing is for LED strip only, power supply/driver are sold separately.
This item is not supplied with a plug, it is supplied with cables ready for a plug to be fitted or hard wired into the mains supply by a qualified professional
This strip is backed with 3M double sided adhesive tape, and is also supplied with clear mounting clips. If the mounting clips are being used to fit the strip, please note the mounting clips are the following dimensions: 15mm wide x 8mm tall.
1 Year Warranty (It is recommended Aluminum Extrusion is used on all LED Strip Installs to prevent Premature failure.)
Caution: It is recommended to run a maximum of 10 meters Power from Both End (Looped), Not Power in Single End to avoid any voltage drop and premature failure.
Caution: It is recommended to run a maximum of 7 meters continuously to avoid any voltage drop and premature failure.
Terms & Conditions:
Bespoke Cutting and Soldering Service for LED Strip
Bespoke Strip Service, please be aware that, due to the customised nature of this service, orders are non-cancellable and non-returnable, and promotional discounts/offers do not apply. Given the bespoke nature, it may take 3 - 5 working days to prepare the cuts. In case of numerous cuts or potential delays, customers will be notified of any extended preparation times and the expected shipping date.
LED Strip Installation Caution: All Bespoke strip orders undergoes testing before being dispatched. Exercise care and caution when installing the LED strip to avoid damage, as LED Strip does not have a protective layer or case, so can easily be physically damaged. Please note that the product warranty may become void if the strip is physically bent or damaged during installation.
Bespoke Strip Quotations:
All quotations for bespoke strips are formulated based on the information provided by the buyer.
Upon acceptance of the quote, the buyer affirms that the product specifications align with their requirements.
Uno Lighting, as the seller, disclaims any responsibility for products not meeting customer requirements once the order has been placed.
Electrical Information Disclaimer:
Uno Lighting, the seller, cannot provide information about electrical installation or electrical requirements for any lighting or electrical products.
Buyers are strongly advised to consult a qualified professional before contacting the seller regarding project requirements and seeking technical information about installation and maintenance.
By proceeding with a purchase, the buyer acknowledges and agrees to these terms and conditions.
This strip is backed with 3M double sided adhesive tape, and is can also supplied with clear mounting clips. If the mounting clips are being used to fit the strip, please note the mounting clips are the following dimensions: 15mm wide x 8mm tall.
If you require the clear mounting clips please inform us at the point of order.