10W/m Cut-Anywhere Dotless LED Strip – 2700K / 3000K / 4000K / 6000K – 5m / 10m Reel – 24V – 8mm / 10mm – IP20 / IP65 - Uno Lighting

Delivery Time – If this item is in stock, delivery is 3–5 working days.

For a customised LED strip quotation, please email your requirements to sales@uno-lighting.com

10W/m Cut-Anywhere Dotless LED Strip – 2700K / 3000K / 4000K / 6000K – 5m / 10m Reel – 24V – 8mm / 10mm – IP20 / IP65 - Uno Lighting

This professional-grade 10W/m COB Dotless LED Strip combines a higher light output with high-density LED technology and the flexibility to cut anywhere along the strip, making it ideal for installations requiring precise lengths and smooth, continuous illumination.

Available in two versions: a slim 8mm IP20 bare PCB for dry indoor applications, or a 10mm IP65 silicone-sleeved version for installations requiring additional protection against moisture.

Featuring 528 LEDs per metre and CRI >90, the strip produces smooth, dot-free illumination with excellent colour quality. Choose from 2700K Extra Warm White, 3000K Warm White, 4000K Cool White or 6000K Daylight.

Available in 5m and 10m reels, the strip operates at 24V DC, supports compatible PWM dimming and is well suited to cabinetry, shelving, coving, feature lighting and architectural linear lighting.

Product Specifications

Colour Temperature & Light Output

The IP20 and IP65 versions have slightly different light outputs due to the protective silicone sleeve used on the IP65 version.

IP20 – 8mm Slim PCB

The IP20 version uses a slim 8mm bare PCB without a protective coating or sleeve, making it particularly useful for installations where space is limited.

It is intended for dry indoor applications only and should not be installed where it may be exposed to water or moisture.

Because the IP20 strip has no protective layer, additional care should be taken when handling and installing it to avoid physical damage to the PCB and components.

For improved protection, heat management and a professional finished appearance, we recommend installation within a suitable Uno Lighting aluminium profile.

IP65 – 10mm Silicone-Sleeved Version

The IP65 version is 10mm wide and enclosed within a protective silicone sleeve, providing increased protection against moisture and physical contact compared with the bare IP20 version.

The silicone sleeve makes this version suitable for appropriate applications where increased moisture protection is required.

If the IP65 strip is cut, the silicone sleeve and newly exposed end must be appropriately resealed where the IP65 protection needs to be maintained.

Genuine Cut-Anywhere Design

Unlike conventional LED strips with fixed cutting intervals, this COB strip features a genuine cut-anywhere design, providing much greater flexibility when preparing precise lengths.

This is particularly useful for cabinetry, shelving, furniture, coving and architectural details where the finished strip length needs to closely match the installation.

Care must still be taken when cutting, soldering and installing the strip to avoid damage to the PCB or electrical components.

Maximum Run Length

For reliable performance, the recommended maximum continuous powered lengths are:

The 5m reel is supplied with a power cable at one end.

The 10m reel is supplied with power cables at both ends and should be powered from both ends when operating the complete 10m length.

Driver Requirements

This LED strip operates at 24V DC and must never be connected directly to 230V mains electricity.

A suitable 24V constant-voltage LED driver is required and is sold separately.

Driver capacity should be calculated according to the actual strip length being powered. We recommend allowing at least a 20% driver capacity buffer above the calculated LED strip load.

At 10W/m:

A full 5m reel has a 50W load and requires a minimum calculated driver capacity of 60W.

A full 10m reel has a 100W load and requires a minimum calculated driver capacity of 120W. The complete 10m run should be powered from both ends.

The strip supports PWM dimming when used with a compatible 24V dimmable driver or controller.

Installation Guidance

Handle the LED strip carefully during installation. Avoid excessive bending, twisting, pulling or physical pressure, as this can damage the PCB, LEDs or internal electrical connections.

The IP20 version has no protective sleeve, so particular care should be taken when handling and installing it.

The IP65 version is protected by a silicone sleeve. If the strip is cut or modified, any newly exposed ends must be appropriately resealed where IP65 protection needs to be maintained.

We recommend using a suitable Uno Lighting aluminium profile to provide physical protection, assist with heat management and create a professional finished installation.

Warranty

This LED strip is supplied with a 2-year standard warranty.

The warranty is extended to 3 years when purchased and installed with a suitable Uno Lighting aluminium profile, helping provide appropriate heat management, physical protection and long-term performance.

Physical damage caused by incorrect handling, cutting, bending or installation is not considered a product manufacturing defect.

Important Information

• This listing is for the LED strip only, unless otherwise stated.

• LED driver, controller, aluminium profile and other accessories are sold separately.

• Available as 8mm IP20 bare PCB or 10mm IP65 silicone-sleeved versions.

• Available in 2700K, 3000K, 4000K and 6000K.

• This strip features a genuine cut-anywhere design.

• Maximum recommended continuous run is 5m powered from one end / 10m powered from both ends.

• The 5m reel is supplied with a power cable at one end.

• The 10m reel is supplied with power cables at both ends.

• A suitable 24V constant-voltage LED driver is required.

• Never connect the LED strip directly to 230V mains electricity.

• We recommend allowing at least 20% additional driver capacity above the calculated strip load.

• The IP20 version is intended for dry indoor applications only.

• The IP65 version uses a protective silicone sleeve.

• If the IP65 version is cut, the newly exposed end must be appropriately resealed where IP65 protection needs to be maintained.

• All LED strips are tested before dispatch.

• Please confirm the voltage, wattage, dimensions, colour temperature, IP rating and installation requirements are suitable for your application before ordering.

• Installation must be carried out by a suitably qualified person.

Electrical Installation Disclaimer

Uno Lighting cannot provide site-specific electrical installation instructions. All mains electrical connections and installation work must be carried out in accordance with applicable electrical regulations by a suitably qualified professional.