All worked perfectly.
This store requires javascript to be enabled for some features to work correctly.
For a customised LED strip quotation, please email your requirements to sales@uno-lighting.com
A professional-grade 24V ultra-long-run dotless LED strip, supplied as a full 40-metre reel with power cables at both ends for larger residential and commercial installations.
Featuring high-density COB technology with 384 LEDs per metre, this 8W/m strip provides smooth, seamless and dot-free illumination, delivering up to 720lm per metre with CRI 90 for excellent colour quality. The 3000K Warm White output creates a comfortable and welcoming light ideal for residential, hospitality and commercial applications.
Built-in IC technology supports continuous runs of up to 20 metres when powered from one end, or the full 40-metre reel when powered from both ends, helping maintain consistent brightness and minimise voltage drop throughout the installation. The slim spray-coated Indoor IP65 finish provides additional protection without the bulk of a traditional silicone sleeve.
| Specification Details | |
|---|---|
| Input Voltage | 24V DC |
| Power | 8W/m |
| Light Output | Up to 720lm/m |
| CRI | 90 |
| LED Density | 384 LEDs/m |
| Strip Width | 10mm |
| Cutpoint | 56mm |
| IP Rating | Indoor IP65 |
| Colour Temperature | 3000K – Warm White |
| Dimmable | Yes – with compatible 24V PWM dimmable driver/controller |
| Maximum Run – Single-End Power | Up to 20m |
| Maximum Run – Both-End Power | Up to 40m |
| Power Cables | Supplied at both ends of the 40m reel |
| Reel Length | 40m |
| Lighting Effect | Seamless, dot-free linear illumination |
| Application | Residential & commercial indoor installations |
| Colour Temperature | Appearance | Recommended Use |
|---|---|---|
| 3000K | Warm White | Residential, hospitality and general lighting applications |
Built-in IC technology is designed to maintain consistent performance across longer LED strip installations.
The strip can be installed as a continuous run of up to 20 metres when powered from one end.
For a continuous 40-metre installation, the reel is supplied with power cables at both ends, allowing power to be supplied from both ends to minimise voltage drop and maintain consistent brightness across the full length.
| Power Configuration | Maximum Continuous Run |
|---|---|
| Powered from one end | Up to 20m |
| Powered from both ends | Up to 40m |
This LED strip operates at 24V DC and must not be connected directly to 230V mains electricity.
A suitable 24V constant-voltage LED driver is required and is sold separately. The driver should be correctly sized according to the total wattage and length of LED strip being installed.
For a full 40m installation, the total LED strip load is 320W (40m × 8W/m), so the driver and power-feed arrangement must be appropriately sized for the installation.
We recommend installing the LED strip within a suitable aluminium LED profile to provide heat dissipation, protection and a professional finished appearance.
The spray-coated IP65 protection is designed for indoor applications, including kitchens and bathrooms. This product is not recommended for permanent outdoor installation.
Cut sections and electrical connections should be correctly protected where required to maintain the appropriate level of protection. Avoid excessive bending, twisting or pressure on the LED strip during installation.
Uno Lighting cannot provide site-specific electrical installation instructions. All mains electrical connections and installation work must be carried out in accordance with applicable electrical regulations by a suitably qualified professional.