10W/m Dotless LED Strip – 3000K / 4000K / 6500K – 5m Reel – 24V – 10mm – IP44 - Uno Lighting
A high-output 24V dotless LED strip designed to provide smooth, continuous illumination with no visible LED dots. Delivering approximately 1,010lm per metre at just 10W/m, this strip provides an excellent balance of brightness and efficiency for professional residential and commercial lighting installations.
Featuring 384 LEDs/m, CRI 90 and a 10mm PCB, the strip produces high-quality, uniform illumination and is available in 3000K Warm White, 4000K Cool White and 6500K Daylight.
Supplied in a 5-metre reel with 500mm power tails at both ends, providing greater flexibility when planning power feeds and longer lighting installations.
Product Specifications
| Specification | Details |
|---|---|
| Input Voltage | 24V DC |
| Power | 10W/m |
| Light Output | Approx. 1,000lm/m |
| Efficiency | Approx. 100lm/W |
| CRI | 90 |
| LED Density | 384 LEDs/m |
| Strip Width | 10mm |
| Cutpoint | 50mm |
| IP Rating | IP44 – Indoor Use |
| Colour Temperatures | 3000K / 4000K / 6500K |
| Dimmable | Yes – supports compatible 24V PWM dimming |
| Maximum Continuous Run | 5m single-end / 10m powered from both ends |
| Reel Length | 5m |
| Power Cables | 500mm power tails supplied at both ends |
| Lighting Effect | Seamless, dot-free linear illumination |
| Application | Residential, commercial, cabinetry, architectural & general indoor lighting |
Colour Temperature Guide
| Colour Temperature | Appearance | Recommended Use |
|---|---|---|
| 3000K | Warm White | Residential, hospitality and general ambient lighting |
| 4000K | Cool White | Kitchens, work areas, retail and commercial lighting |
| 6500K | Daylight | Bright, crisp task, display and commercial applications |
Maximum Run Performance
For consistent brightness and to minimise voltage drop, the recommended maximum continuous run is 5 metres when powered from one end.
For installations requiring a longer continuous run, up to 10 metres can be powered when correctly fed from both ends. The 5m reel is supplied with 500mm power tails at both ends, providing greater flexibility when configuring the power supply.
| Power Configuration | Maximum Continuous Run |
|---|---|
| Powered from one end | Up to 5m |
| Powered from both ends | Up to 10m |
Please note: This product is supplied in 5m reels only. The 10m maximum refers to the supported both-end powered installation length and does not mean the strip is supplied as a 10m reel.
Driver Requirements
This LED strip operates at 24V DC and must not be connected directly to 230V mains electricity.
A suitable 24V constant-voltage LED driver is required and is sold separately. The driver should be correctly sized according to the total wattage and length of LED strip being installed.
The strip supports PWM dimming when used with a compatible 24V dimmable driver or controller.
Installation & IP44 Protection
For optimum heat dissipation, protection and long-term performance, we recommend installing the LED strip within a suitable aluminium LED profile.
The IP44 rating is intended for suitable indoor applications. This strip is not designed for permanent outdoor installation, wet environments or applications where it may be exposed to water.
Handle the LED strip carefully during installation and avoid excessive bending, twisting or pressure that may damage the strip.
Warranty
This LED strip is supplied with a 2-year warranty.
The warranty is extended to 3 years when the LED strip is purchased and installed with a suitable Uno Lighting aluminium profile, helping provide appropriate heat dissipation and protection for long-term performance.
Important Information
-
This listing is for the LED strip only unless otherwise stated.
-
LED driver, controller, aluminium profile and other accessories are sold separately.
-
All LED strips are tested before dispatch.
-
Maximum continuous run is 5m when powered from one end or up to 10m when correctly powered from both ends.
-
Supplied as a 5m reel with 500mm power tails at both ends.
-
IP44 is intended for suitable indoor applications only.
-
Handle the strip carefully during installation and avoid excessive bending, twisting or physical damage.
-
Please confirm the voltage, wattage, strip width, colour temperature and IP suitability before ordering.
-
Installation must be carried out by a suitably qualified person.
Electrical Installation Disclaimer
Uno Lighting cannot provide site-specific electrical installation instructions. All mains electrical connections and installation work must be carried out in accordance with applicable electrical regulations by a suitably qualified professional.