5W IP20 / IP65 SEAMLESS COB LED STRIP (Furniture & Cabinetry)

Delivery Time – If this item is in stock, delivery is 3–5 working days.

5W/m Dotless LED Strip – 2700K / 3000K / 4000K / 6500K – 5m / 10m Reel – 24V – 8mm / 10mm – IP20 / IP65 – Uno Lighting

A slim, low-power 24V dotless COB LED strip, designed especially for furniture, cabinetry, shelving and other applications where space is limited and a clean, seamless lighting effect is required.

Consuming just 5W per metre, the strip features a high density of 480 LEDs/m to create smooth, dot-free illumination while keeping power consumption low. Available in four colour temperatures from 2700K Very Warm White through to 6500K Daylight, with CRI >90 for excellent colour quality.

Choose between a slim 8mm IP20 strip, delivering up to 520lm/m, or a silicone-sleeved 10mm IP65 version, delivering up to 505lm/m with additional protection. Both versions are available in 5m and 10m reels.

Product Specifications

Colour Temperature Guide

Maximum Run Performance

For consistent brightness and to minimise voltage drop, the recommended maximum continuous run is 5 metres when powered from one end.

The 10-metre reel is supplied with power cables at both ends, allowing the full 10m length to be powered from both ends for consistent performance across the complete run.

Driver Requirements

This LED strip operates at 24V DC and must not be connected directly to 230V mains electricity.

A suitable 24V constant-voltage LED driver is required and is sold separately. The driver should be correctly sized according to the total wattage and length of LED strip being installed.

The strip supports PWM dimming when used with a compatible 24V dimmable driver or controller.

Installation & IP Protection

For optimum heat dissipation, protection and long-term performance, we recommend installing the LED strip within a suitable aluminium LED profile.

The IP20 version is designed for dry indoor applications and does not have a protective waterproof layer. Extra care should therefore be taken during handling and installation to avoid physical damage.

The IP65 version features a protective silicone sleeve and is suitable for appropriate indoor and outdoor applications. It is not suitable for outdoor in-ground installations or permanent submersion.

Please ensure the selected aluminium profile and accessories are compatible with the strip width: 8mm for IP20 and 10mm for IP65.

Warranty

This LED strip is supplied with a 2-year warranty.

The warranty is extended to 3 years when the LED strip is purchased and installed with a suitable Uno Lighting aluminium profile, helping provide appropriate heat dissipation and protection for long-term performance.

Important Information

• This listing is for the LED strip only unless otherwise stated.

• LED driver, controller, aluminium profile and other accessories are sold separately.

• All LED strips are tested before dispatch.

• Maximum continuous run is 5m when powered from one end or 10m when powered from both ends.

• Handle the LED strip carefully during installation and avoid excessive bending, twisting or pressure that may cause physical damage.

• Please confirm the voltage, wattage, strip width, IP rating, colour temperature and reel length are suitable for your application before ordering.

• Installation must be carried out by a suitably qualified person.

Electrical Installation Disclaimer

Uno Lighting cannot provide site-specific electrical installation instructions. All mains electrical connections and installation work must be carried out in accordance with applicable electrical regulations by a suitably qualified professional.